Inspection Detail
Kitchen
1
Bathroom
5
Bathroom 2
3
Electrical
2
INSPECTOR
Ron Long
2.5.1 – Dishwasher
NOT OPERATIONAL
The dishwasher was not operational at the time of inspection. A qualified contractor should evaluate and repair or replace as necessary.
3 – Bathroom
3.5.1 – Cabinets & Counters
LOOSE – SINK
The sink was not properly secured to the wall. A qualified contractor should evaluate and repair or replace as necessary.
3.6.1 – Drain Waste and Vent System
LOOSE- DRAIN LINE
The drain line is not properly secured and could possibly leak if not corrected. A qualified contractor should evaluate and repair or replace as necessary.
3.6.2 – Drain Waste and Vent System
FLEX
Flexible drain lines can clog, leak or fail. A qualified contractor should evaluate and repair or replace as necessary.
3.8.1 – Plumbing Fixtures
DAMAGED- DOOR
The door was missing the latch hardware. A qualified contractor should evaluate and repair or replace as necessary.
3.9.1 – Toilets
LOOSE AT THE FLOOR
The toilet was loose at the floor. This condition typically is caused by loose bolts or nuts and/or missing floor seals. Loose toilet can result in leaks, water damage, and mold, as well as damage to the toilet, water supply lines, bolts, and drainage pipes. A qualified contractor should evaluate and repair or replace as necessary.
4 – Bathroom 2
4.5.1 – Cabinets & Counters
LOOSE- SINK
The sink was not properly secured to the wall. A qualified contractor should evaluate and repair or replace as necessary.
4.6.1 – Drain Waste and Vent System
LOOSE- DRAIN LINE
The sink drain line was loose and could possibly leak if not corrected. A qualified contractor should evaluate and repair or replace as necessary.
4.6.2 – Drain Waste and Vent System
FLEX
Flexible drain lines can clog, leak or fail. A qualified contractor should evaluate and repair or replace as necessary.
5 – Electrical
5.3.1 – Distribution Panels
DAMAGE – PANEL
The electrical panel was damaged. A qualified contractor should evaluate and repair or replace as necessary.
5.3.2 – Distribution Panels
SCREWS MISSING – PANEL COVER
Screws / fasteners were missing at the electrical panel cover. A qualified contractor should evaluate and repair or replace as necessary.
