
The following areas, systems, or components had visible mold growth, the presence of moisture or moisture intrusion, and/or conditions that are conducive to mold growth:
A qualified mold mitigation contractor should evaluate further and repair or replace as necessary and according to current standards.
Quantity and concentration of “marker” spore types:
This score indicates the likelihood that certain distinctive types of mold present in the indoor sample originated from indoor sources. Certain types of mold are generally found in very low numbers outdoors. Consequently, their presence indoors, even in relatively low numbers compared to Penicillium, for example, is often an indication that these molds are originating from growth indoors. When present, these mold types are often the clearest indicator of a mold problem. Note, however, that the absence of marker spore types does not mean that a mold problem does not exist in a house; it just means that if a problem is present, it either involves types of mold that are more commonly found both indoors and outdoors, or that the spores from these molds were not airborne at the time of sampling.
Stachybotrys:
Distribution: Stachybotrys is ubiquitous in nature. This genus contains about 15 species.
How it is spread: Stachybotrys produces wet slimy spores and is commonly dispersed through water flow, droplets, or insect transport, less commonly through the air.
Where it is found outdoors: Stachybotrys is found in soils, decaying plant debris, decomposing cellulose, leaf litter, and seeds.
Where it is found indoors: Stachybotrys is common indoors on wet materials containing cellulose such as wallboard, jute, wicker, straw baskets, and other paper materials.
We recommend that you consult with an EPA-certified mold mitigation company if you are not familiar with how to locate and safely remove mold growth or how to identify and correct moisture problems that may exist.
Recommend contacting a qualified mold mitigation company for further evaluation of the moderate or high levels of “Marker” spore types – Stachybotrys, that were identified in the air sample that was taken at the time of the inspection. A recommendation for a local company is Spectrum Cleaning and Restoration at 720-316-6850.


A lead-based paint test was requested and performed by use of a Niton XLp 300 XRF Analyzer. The XRF has an element that shows the results of the content of lead in paint immediately. Lead-based paint is defined as paint with a lead content of 1% or higher. Lead that is digested, inhaled, or otherwise introduced to the body may develop negative health effects. If lead exposure is suspected it is recommended to see your general physician for an evaluation.
The pictures are in order of the samples taken. Upon entering a new room the first two pictures will show the room being tested. The following pictures will show the result of the sample next to the area sampled. Duplicate samples, i. e. multiple walls in a room, will be represented by one sample unless the result is positive.
Lead-based paint can be harmful to the body when disturbed. The main concern with lead-based paint in the home is small children and animals teething or chewing on any surface with lead content. If exposure has happened it is recommended to be evaluated by a general physician.
The following pictures in this section of this report note the areas that tested positive.
RECOMMENDATIONS:
The following surfaces that were tested throughout the interior and exterior of the home tested positive for lead-based paint:
(describe paint surface, color, location, and condition of paint)
Due to the positive results, it is recommended to continue maintenance to prevent flaking or deterioration of the paint that tested positive, and/or if demolition, modification, or removal of the painted materials is to take place, a qualified lead abatement contractor should properly abate these aforementioned areas that tested positive, according to current standards.
What activities are subject to the Lead Renovation, Repair, and Painting Program?
Any activity that disturbs more than 6 square feet of lead paint per room for interior activities or more than 20 square feet on any exterior surface.