Inspection Detail
Kitchen
Laundry
Bathroom
Bathroom 2
Bathroom 3
Plumbing
Water Heating Equipment
Interior, Doors, Windows
Exterior- Not inspected
Attatched Garage- Not inspected
Cooling- Not inspected
Heating- Not inspected
Electrical- Not inspected
Mold Inspection
Premier Partners
The shower/bathtub faucet was weak in volume and/or pressure. A qualified contractor should evaluate and repair or replace as necessary.
The sink drain line was clogged or drains slowly. A qualified contractor should evaluate and repair or replace as necessary.
The tub/shower drain line was clogged or drains slowly. A qualified contractor should evaluate and repair or replace as necessary.
There was a leak at the shower head connection at the time of inspection. Recommend a qualified contractor evaluate and repair or replace as necessary.
The hot water in the shower did not get over 100 degrees whereas the nearby faucets did. This may indicate that either the mixing valve (safety feature to limit potential scalding) or control cartridge needs adjustment to achieve a hot shower. There may be a more significant issue, that only further evaluation can reveal.
Hot and cold supply was installed correctly and the property’s overall hot water temperature was within an acceptable range.
Recommend a qualified contractor evaluate and repair or replace as necessary.
The water temperature was below the suggested range of 120-130 degrees. Recommend adjusting the water heater thermostat first. If water does not reach the acceptable range then a qualified contractor should evaluate and repair or replace as necessary.
The sprinkler system supply line was leaking at the time of inspection. Recommend a qualified contractor evaluate and repair or replace as needed.
